Terras & Co bv ... your reliable partner for outdoor heating products, good advice and excellent service.

Fire Pit Insert | Gas Burner for Fire Table | Black with Profile Edge – 39×54 cm

//Fire Pit Insert | Gas Burner for Fire Table | Black with Profile Edge – 39×54 cm

Fire Pit Insert | Gas Burner for Fire Table | Black with Profile Edge – 39×54 cm

 630,00 incl. BTW

A built-in gas burner for creating a fire table: a ‘table with fire’!
You can insert this rectangular gas burner in your own coffee or dining table. Installation is easy for any DIY enthusiast.
With this fire pit insert kit, you make your own unique fire pit table!

    • 0 €
    • 0 €
    • 0 €

Description

This Fire Pit Insert Gas Burner for outdoors is, like all our fire pit table inserts, completely assembled.

 

This beautiful gas burner can be inserted in the excision of your own table. The 5 x 3 cm black powder coated profile edge of the burner rests on the tabletop and extends 5 cm above the table.

Let the gas burner sink in the excision of your table, connect the gas supply and the fire pit can burn immediately!
Experience the pleasant warmth and atmosphere, but also the convenience of a gas fireplace.

With the electronic ignition, you’ll start your fire pit with the push of a button. The flames are infinitely adjustable from low to high. The burner bed gives a lot of warmth and beautiful big flames, this makes it look like a wood fire.

 

Length of the gas hose: You can specify the length of the gas hose in the drop down menu. 1 meter is included as standard.

Choice of gas type: The fire pit is available on propane gas or natural gas for the same price.

All table fireplaces are CE certified under number 0063BQ3153.

 

The dimensions of the built-in table hearth with profile edge:

39 cm x 39 cm – excision in tabletop 34 × 34 cm
49 cm x 49 cm – excision in tabletop 44 × 44 cm
39 cm x 54 cm – excision in tabletop 34 × 49 cm
39 cm x 69 cm – excision in tabletop 34 × 64 cm
39 cm x 84 cm (only works on natural gas) – excision in tabletop 34 × 79 cm

 

 

   IMG_6393

This Fire Pit Insert of supreme quality comes as a complete installation kit:

.  Burner / Fire tray with heat resistant powder coating
.  Frame, black, 5 cm high above the tabletop
.  Lid that covers the burner completely
.  Protecting cover over wiring
.  Gas control block with official GASTEC KIWA CE certificate
.  Electronic pilot light ignition
.  Control knob to adjust flame heights infinitely
.  Gas hose with pressure regulator or natural gas coupling
.  Anthracite coloured lava rocks

 

This product line of Fire Pit Inserts is designed and produced in the Netherlands.

Dutch design, manufacturing quality and safety standards are your best guarantee for many years of enjoyment!

Safety

The gas burners are designed for installation in outdoor furniture. They are equipped with a safety system which is enclosed and protected by a stainless-steel hood, together with the wiring and control block. Our fire pits comply with the most stringent Dutch safety regulations and are KIWA and CE approved for entire Europe. The fire pits are equipped with electronic piezo ignition and thermoelectric protection which protects against overheating. This protection blocks the gas supply. A pilot light provides thermal protection. When the pilot light goes out, it always shuts the gas supply. The gas pressure remains constant with a working pressure of 30 mbar via the gas pressure regulator. As a result, the flames can be infinitely adjusted via the control knob on the control block.

In our burners, a special silencer has been installed to prevent the annoying or disturbing noise of the flowing gas. So, you can enjoy your fireplace and the cozy atmosphere in peace. The fireplaces are delivered with a test certificate, the capacity in kilowatts and the injector size in mm.

 

Additional information

Gassoort

Propaan, Aardgas

Reviews

There are no reviews yet.

Be the first to review “Fire Pit Insert | Gas Burner for Fire Table | Black with Profile Edge – 39×54 cm”

You may also like…